Scratchbuilding progress report

Well I got my camera fixed so as promised here are the things I'm working on.
First I plan on modeling a paper/ pulp mill so I needed a Large circular log crane to unload incoming logs, either by truck or rail. I found this type of crane and thought"I Got To Have One Of These"
the crane scales out at 175 feet long and 65 feet tall. At the base it's 38 feet wide

I also am modeling a large grain elevator that i saw a picture of in an old magazine. this one is all wood instead of styrene
I have alot of work on both to do but thats what makes this Hobby fun.

Steve aka "Slugger"



Sorry, my pictures didnt upload. i'm working on it

Slugger, Try loading one at a time in the Photos section. Cheers, Jim CCRR:)

Thanks, I'll try that
Steve aka "Slugger"

Photos are in the gallery.

Sorry about the problems but my photos were too large for the site.

Steve aka "Slugger"

Slugger, We like photos to be 1200x1600 or less. If you want to submit more than one at a time they will have to be like 600x800. The program dumbs them all down anyway so best to use smaller resolutions. Cheers, Jim CCRR:)