Micro-Trains Grain Tower Build by Modelersguild.com
Oh I can feel it, the empire is growing. Granted it is Z scale yet that diminishes nothing in the eyes of my children.
The grain tower kit is made by Micro-Trains. Each time I try out a MT kit I find myself dreaming of large landscapes and industry. Z scale the under represented king in Space Savings is here, and here to stay.
Assembly is straight forward, hence the instructions are pretty basic. The thing that strikes me as being missing is some elaboration on paint and weather.Before this thought finished passing I had the structure assembled. So whats the point, I dunno. I just state the facts folks...
In this article I am going to take the opportunity to focus on how I finished this model. I am not a self proclaimed expert, nor should I be considered to be. These steps are just my thoughts on the subject.
First as always it starts with a coat of inkahol. It gives a base that provides a random variation on the layers above. IF done before it dries. Then dip your brush in the water, we want the acrylic paint watered down. We dont want the brush floaded with water when it touches the model though. Dabb it off. Why you may ask. Well the dilluted paint will give you control over coverage and spread a larger area.
Remember we left the ink wet to soak through, let it. Follow coats that are deamed necesary will blend right in with the same method of watering the paint down. The difference is when the ink and first coat of paint dries, it is sealed to mixing. Coats of paint above will cover up the ink. A good way to fix a case of TOO much ink. Do this method and with light coats of paint to doctor it into shape. Let it dry.
The final step for this build was some treatments for the loading pipe. For this we used Sophisticated Finishes found at our local Michaels. This is iron filings and a corrosive the rusts the iron. Can't get much more realistic then the real thing.
With some coats of the MIG Nuetral wash to simulate dust and grime. We were ready to settle with good enough. In my opinion a model isn't finished till it is placed on the layout. Certain conditions will warrent different techniques so stopping here is a good idea, again this is only my opinion.
Ron Pare
