- Posts: 173
- Thank you received: 38
Alco C420 " low nose"
12 years 10 months ago - 12 years 10 months ago #12868
by Gerd
is now available! The shell is 100% made from approx. 100 metal etched parts, to be accurate 0.25mm nickel-silver, the tanks are copper tubes. The loco runs on a heavily modified MTL Geep chassis ,stretched and milled thinner by 0.4mm to allow a prototypical width of the shell. The loco is still equiped with the MTL circuit board (slightly thinned) and has the same bi-directional lights as standard Geeps. This example in Lehigh Valley colours was built for Alexis Bercq in Japan. The loco is availlabe to custom order in a variaty of road names.
Alco C420 " low nose" was created by Gerd
is now available! The shell is 100% made from approx. 100 metal etched parts, to be accurate 0.25mm nickel-silver, the tanks are copper tubes. The loco runs on a heavily modified MTL Geep chassis ,stretched and milled thinner by 0.4mm to allow a prototypical width of the shell. The loco is still equiped with the MTL circuit board (slightly thinned) and has the same bi-directional lights as standard Geeps. This example in Lehigh Valley colours was built for Alexis Bercq in Japan. The loco is availlabe to custom order in a variaty of road names.
Please Log in or Create an account to join the conversation.
12 years 9 months ago - 12 years 9 months ago #13156
by BillMock
Look what just got posted.
Looks pretty similar.
Nice work Gerd!
www.locophotos.com/PhotoDetails.php?PhotoID=123095
Bill Mock
Replied by BillMock on topic Re: Alco C420 " low nose"
Look what just got posted.
Looks pretty similar.
Nice work Gerd!
www.locophotos.com/PhotoDetails.php?PhotoID=123095
Bill Mock
Please Log in or Create an account to join the conversation.
Time to create page: 0.190 seconds
